Filter
Top Products
124 Barco - RHDM-1701 - User manual
Full functionality description
4.3.5.3 Dual link 1-AB menu
• Measured standard link A: the standard measured by the display unit on link A.
•
Identifier packet link A: the packet with standard information identified by the display unit on
link A.
•
Measured standard link B: the standard measured by the display unit on link B.
•
Identifier packet link B: the packet with standard information identified by the display unit on
link B.
To display the video information on the screen, the display unit gives priority to the standard it
detects by analyzing the input signal. If the identifier packet does not correspond to the measured
standard, or if the video signal is not displayed properly due to a wrong measurement of the
standard, it is possible to force the display unit to show the video signal according to manual
settings by checking the “Override signal detection” option.
•
Override signal detection: when checked, the display unit will ignore the measured standard
and will display the video signal according to the manual settings.
•
Encoding: sets the encoding of the video signal. This can be RGB or YCbCr.
automatic detection of the input signal
input signal is set manual: override signal detection is checked