Filter
Top Products
62 Barco - RHDM-1701 - User manual
How to
• 3D-LUT upload
Plug in the USB stick in the USB port of the display unit. The file is automatically uploaded
into the unit. Give the monitor 15s time to copy the file before removing the USB stick
To use the new user 3D-LUT file, the file should be activated via the “Input settings” OSD
menu or via the web interface.
3.15.3 3D-LUT upload via web interface
• Connect the display unit to the local network
Plug an ethernet cable in ethernet port 0 or ethernet port 1.
• Connect with the pc to the display unit
Check the IP address that is assigned to the ethernet port. Press (
)
to open the “Dis-
play Information” toolbox. Write down the IP address of the corresponding ethernet port.
Open a browser window and type in the Address bar: “http://” + the IP address + “/” (e.g.
“http://150.158.200.140”). The web interface of the display unit will open.