Filter
Top Products
Barco - RHDM-1701 - User manual 127
Full functionality description
• Factory: The first named 'Factory' load and applies the factory preset. It basically restores all
settings to their factory defaults. The factory preset is unique compared to the others because it
cannot be modified.
•
Presets list: The 5 other actions load and apply one out of 5 user definable presets. The name
represents the file name of the preset. When the corresponding file does not exists it is named
'none'. The name can be defined when creating/storing the preset.
Upon invoking one of the 6 actions, feedback is provided to the user at the bottom of the load
submenu. In the example above the feedback/status is <blank> which is default.
Possible values are:
'Preset loaded': Indicates the preset was loaded.
'Load failed, no such preset file': The loading of the preset failed because the preset file was
not found.
'Load failed, invalid preset file': The loading of the preset failed because the preset file was
not valid. This means that a file was found with that name but that it isn't a preset file.
'Load failed': The loading failed because of another reason
<blank>: The feedback/status field is by default blank and is also again blank after 15s.
This means that its information is only shown for about 15s.
4.3.7.3 Store presets
The store submenu is used to store the current user settings into a preset.
• The store submenu has 5 entries, numbered 1 to 5 corresponding with preset 1...5. Next to the
number is the name of preset which represents the filename of the preset file.
Upon selecting one of the 5 entries another submenu is opened.
This submenu has a field to optionally change the name of the preset to be stored. Secondly it has
the command to store the preset.