Filter
Top Products
50 Barco - RHDM-1701 - User manual
How to
The inputs selected for window 1 and window 2 are shown together on the screen. When the
display is showing the inputs in Pan&Zoom or dual view mode, the input settings can still be
changed by pressing
or
to activate the respective window and/or cycle through the
available inputs for that window. The changes will be shown instantaneously.
In the
Pan&Zoom mode the two inputs are shown in full format (cropped) on the screen. In this
mode it is possible to pan the image and to zoom in on the image. These functions can be
performed for window 1 and window 2 separately.
To change the relative size of the two parts of the screen in the Pan&Zoom mode:
• Move with the pointer to the separating line in the middle of the screen using the trackball
• When the double arrow appears while hovering with the pointer above the separating line, press
(continuously) and drag the separating line to the left or the right using the trackball
• Release
to leave the separating line at the obtained position
In the
dual view mode, the two inputs are scaled to fit the new window size. The aspect ratio
remains unchanged while up- or downscaling.
pointer
double arrow