Filter
Top Products
18 Barco - RHDM-1701 - User manual
First operation
• Check the indicator lights to verify the status of the display unit. When no indicator lights
are lit, check the installation instructions in the addendum to power up the display unit (check if
the power switch at the back is switched on).
Standby/Power LED = green: Display unit is switched on – no further actions are necessary.
Standby/Power LED = orange: Display unit is switched on (soft standby) – the panel and
backlights are switched off. Press (
)
on the control panel to activate the panel and
backlights.
Standby/Power LED = white: Display unit is switched off (hard standby) – press (
)
on
the control panel to switch the display unit on. The Standby/Power LED will light up green.
Figure 3: Control panel – power button
1 Power button
2Track ball
1
2