Filter
Top Products
Barco - RHDM-1701 - User manual 213
Addendum
Mount the Barco stand
Place the display unit with the front side on a horizontal, flat and stable table, covered with bubble
wrap or a similar protective material and unscrew the 4 knurled screws provided on the 4 VESA
mounting positions.
Figure 74: Removal 4 knurled screws
Use the 4 knurled screws to mount the stand on the bottom 4 VESA mounting positions. Place the
display unit up-right and verify that the display unit is placed on a flat and horizontal surface at all
times.
Figure 75: VESA mounting with the 4 knurled screws
2
3