Filter
Top Products
Barco - RHDM-1701 - User manual 85
Full functionality description
4.2.2.3 Screen select button
4.2.2.4 Calibration button
Function Description
Screen select
Opens the Display information toolbox:
•
Display name: Name of the display unit
•
Serial number: Serial number of the display unit
•
Software version: Version of the currently active
software
•
Network information:
eth0/ eth1
DHCP: switches the DHCP protocol on/off
IP Address: current IP address assigned to the display
unit
IP Netmask: current netmask address
Gateway: current gateway address
MAC: MAC address of the ethernet port
•
Apply: confirm the changes of the settings
•
Cancel: cancel the changes of the settings
•
Refresh: refresh the IP address, IP netmask, Gateway
and MAC address.
Note:
To change a value, select the item that has to be
changed using the trackball. Press (
)
or
and
edit the value with the trackball. The value can also be
edited by typing the numbers using the numeric keypad
on the control panel (use
to cancel erroneous in-
puts). When the desired value is reached, Press (
)
or
to confirm.
Function Description
Calibration
Resets Background, Picture, Hue and Saturation and RGB/
Mono select to the preset values. The
button is connected with
the
button. The last selected/saved preset in the color working
space toolbox
will be selected by pressing (
)
.