Filter
Top Products
Barco - RHDM-1701 - User manual 17
First operation
2.3 Switch on the display unit
This section is intended for a user who has no experience with the display unit and describes the
standard settings that are necessary to get the display unit up and running. Please check the
chapter with the “full functionality description” to find detailed information on each part and each
function of the display unit.
Figure 2: Overview indicator lights
NOTE
:
The display unit has a certain delay time between powering up and displaying an image on the screen (20
seconds). The delay time originates from several internal checks and calibrations that are performed to guarantee
the correct display of the image. When in doubt about the status of the display unit, please read the
troubleshooting in the addendum.
1 Standby/Power LED (green or orange)
2Fault LED (red)
3 Calibration LED (orange or red)
1
2
3