Filter
Top Products
144 Barco - RHDM-1701 - User manual
Full functionality description
This web page controls the settings of the UMD bar.
Under Monitor Display
• Visible: Visualize or hide the UMD bar
•
Controlled by: Control the UMD bar manually or via the Tally port (GPI settings).
Manual settings: These settings only apply when “manual” control has been selected.
•
UMD text: Type the text you want to display on the UMD bar
•
Brightness: Select the brightness of the UMD bar (Full, Half, 1/7 or Dark)
•
Text color: Select the color of the text (Red, Green, Amber, Off)
•
Left Tally lamp: Select the color of the left Tally lamp (Red, Green, Amber, Off)
•
Right Tally lamp: Select the color of the right Tally lamp (Red, Green, Amber, Off)
GPI
Brightness
• Controlled by: Select the pin to control the brightness of the UMD bar (GPI1, GPI2, GPI3 or
GPI4)
•
Signal low: Select the brightness if the signal at the selected pin is low (Full, Half, 1/7 or Dark)
•
Signal high: Select the brightness if the signal at the selected pin is high (Full, Half, 1/7 or
Dark)
Left tally lamp
• Controlled by: Select the pin to control the color of the left lamp on the UMD bar (GPI1, GPI2,
GPI3 or GPI4)
•
Signal low: Select the color of the left lamp if the signal at the selected pin is low (Red, Green,
Amber, Off)
•
Signal high: Select the color of the left lamp if the signal at the selected pin is high (Red, Green,
Amber, Off)
Right tally lamp
• Controlled by: Select the pin to control the color of the right lamp on the UMD bar (GPI1, GPI2,
GPI3 or GPI4)
•
Signal low: Select the color of the right lamp if the signal at the selected pin is low (Red, Green,
Amber, Off)
•
Signal high: Select the color of the right lamp if the signal at the selected pin is high (Red,
Green, Amber, Off)
UMD text
• Controlled by: Select the pin to control the color of the text on the UMD bar (GPI1, GPI2, GPI3
or GPI4)