Filter
Top Products
Barco - RHDM-1701 - User manual 219
Addendum
Table 15: Fault and warning list
The warnings under node “1” can easily be solved by the user. These warning are related to the
operation of the display unit out of the calibrated range. These warnings are considered as normal
operation of the display unit. Please consult the section “Full functionality description” for more
information.
The faults and warnings under node “2” are related to licensing issues. These error codes can only
be visualized via the service port and are meant for special maintenance purposes.
The faults and warnings under node “3” and “4” cannot be solved by the customer. Please contact
Barco customer service or your local sales representative for help.
156 W Monochrome The output to the screen is set to monochrome for win-
dow 2
2 Licensing Node related to Faults and warnings related to the licens-
ing. More details can be found in the maintenance man-
ual.
3 Spectrometer Node related to spectrometer faults
301 F Spectrometer sta-
tus: Error
Hardware fault
302 F No spectrometer
found
Hardware fault
303 W Spectrometer re-
setting…
After error 301, the spectrometer will be resetting. In the
meantime, this error code is shown. When resetting is
not successful, error code 301 is displayed again.
4 Calibration data Node related to internal calibration faults
401 F Calibration data
error
Internal calibration data file is corrupt
402 F No calibration data
found
Internal calibration data file is not present
403 F Spectrometer data
error
Spectrometer data file is missing or corrupt