Filter
Top Products
95
Navigation
guidance
■ Touch switches
The following operations are performed using the touch switches on the all-route display
screen.
It is possible to select from the different routes displayed.
(See page 100)
It is possible to change the route search conditions if the route modification screen is
displayed.
Also, indicating an additional transit route to the destination is possible. (See pages
102,
105 and 109)
Route guidance or a demonstration can be initiated.
(See page 112)
After route guidance has started, the display returns to the present location screen.
If there are more than 2 destinations set, the displayed destination can be switched by
touching the remaining distance display
(See page 129).
If you deviate from the route after route guidance has started, the distance to the
destination in a straight line is indicated.
3 routes
Route
Guide
●The search result route is a reference route to the vicinity of the destination. In no
way is it the shortest, fastest or least congested route.
●The required time is calculated using the average speed of your vehicle.
(See
page 124)
. Therefore, there may be slight variations depending on driving
conditions.
●In the following situations, 3 routes cannot be displayed:
• When 2 or more destinations are set
• When a preferred road is indicated
• After route guidance has started
●An all-route display can be displayed even after route guidance has started.
(See page 129)