Filter
Top Products
NX-800/800H
11
5. External Speaker (Option)
5-1. KES-3
The KES-3 is an external speaker for the 3.5-mm-diameter
speaker jack.
■
Connection Procedure
1. Connect the KES-3 to the 3.5-mm-diameter speaker jack
on the rear of the transceiver.
Fig. 5-1
5-2. KES-5 or KES-6
External speaker KES-5 or KES-6 can be installed for
KAP-2. If KES-5 or KES-6 is installed, it can be set by chang-
ing the CN1 short pin from pins 4 and 5 to pins 5 and 6 on
the KAP-2.
KAP-2 CN1 Connect Set Up
4-5 INT. SP or KES-3
5-6 KES-5 or KES-6
When you use the KES-5 or KES-6, plug the short pin to
pins 5 and 6 on the KAP-2.
When you use the INT. SP or KES-3, plug the short pin to
pins 4 and 5 on the KAP-2.
HR1
HR2
EXT
INT
CN116
KAP-2 unit
Short pin
KES-5
or
KES-6
INT. SP
or
KES-3
Fig. 5-2
INSTALLATION
■
Connection Procedure
Insert the crimp terminal into the Square plug supplied
with the KAP-2.
4
5
Square plug
(E59-0419-05)
Black/White
lead
Black lead
Insulating cover
(F29-0481-15)
Fig. 5-3
■
KAP-2 Cable (E37-1113-15) 6-pin Connector
Pin No.
Color Name
1 Red HR2
2 Blue GND
3 Yellow OSP
4 Green ESP
5 Brown GND
6 Black HR1
3
21
654