Filter
Top Products
NX-800/800H
44
ADJUSTMENT
Controls
KMC-36
Modular
MIC jack
Keypad
[HOOK]
Channel Up/Down key
[PTT]
Power switch
Volume Up/Down key
Programmable function keys
Panel Test Mode
■
Test mode operation features
This transceiver has a test mode. To enter test mode,
press and hold the [
] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily. Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.
■
Key operation
Key
“FNC” not appears on the sub LCD display
Function Display
[
] / [ ] Test CH up/down Channel No.
[
] / [ ] Volume up/down -
[
]
Push: Squelch level up
Hold: Squelch off
Squelch level
Squelch off: icon appears
[
] Wide/Narrow/Very narrow
Wide: “w”
Narrow: “n”
Very narrow: “v”
[
] Shift to panel tuning mode -
[
] Function on
“FNC” appears on the sub
LCD display
[
] MSK 1200bps and 2400bps 2400bps: icon appears
[
] Test signaling CH up Signaling No.
Key
“FNC” not appears on the sub LCD display
Function Display
Microphone key
[PTT] Transmit -
[0] to [9]
and [A]
to [D],
[#], [
]
Use as the DTMF keypad.
If a key is pressed during
transmission, the DTMF
corresponding to the key
that was presses is sent.
-
Key
“FNC” appears on the sub LCD display
Function Display
[
]-
[
] Analog/NXDN
Analog: “A”
NXDN: “N”
[
] / [ ] Function off -
[
]- -
[
] LCD all lights LCD all point appears
[
] High power/Low power Low: icon appears
[
] Function off -
[
] Compander on/off On: icon appears
[
] Beat shift on/off On: icon appears
Microphone key
[PTT] Transmit
[0] to [9]
and [A]
to [D],
[#], [
]
Function off -
• LED indicator
Red LED Lights during transmission.
Green LED Lights when there is carrier.
• Sub LCD indicator
“FNC” Appears at function on.
• LCD display in panel test mode
An SQ5 1- 1
Channel No.
An : Analog narrow mode
Aw : Analog wide mode
Nn : NXDN narrow mode
Nv : NXDN very narrow mode
Sub LCD display
+25
Signaling No.
Main LCD display
Squelch level
(Analog mode only)
Temperature