Filter
Top Products
NX-800/800H
53
ADJUSTMENT
Item
Condition Measurement Adjustment
Specifi cations /
Remarks
Panel test mode PC test mode
Test-
equipment
Unit
Terminal
Unit Parts Method
2. Low
Transmit
Power
Limit
adjust
1) Adj item: [LOLMT]
Adjust: [
✳✳✳✳
]
2) Adj item:
[L LOLMT]
→
[L’ LOLMT]
→
[C LOLMT]
→
[H’ LOLMT]
→
[H LOLMT]
Adjust: [
✳✳✳✳
]
PTT: ON
Press [ ] key to store
the adjustment value.
1) Adj item:
[Low Trans-
mit Power Limit]
2) Adj item: [Low],
[Low’], [Center],
[High’], [High]
PTT: Press
[Transmit] button.
Press [Apply All]
button to store the
adjustment value.
Power
meter
Ammeter
ANT
[Panel
tuning
mode]
[ ],[ ]
[PC test
mode]
[ ],[ ]
15.0W K
25.0W HK
±1.0W
[PC test mode]
Press [Apply All]
button to store the
adjustment value
after all adjustment
point was adjusted.
CAUTION!
Do not attempt to
adjust the transceiv-
er’s transmit output
power beyond its
specifi cations.
If the transceiver
is adjusted beyond
the specifi cations, it
may cause deterio-
ration of the parts
reliability and the
output power may
be lowered sud-
denly and unstable.
The transceiver may
be also extremely
hot.
3. High
Transmit
Power
adjust
1) Adj item: [HIPWR]
Adjust: [
✳✳✳✳
]
2) Adj item:
[L HIPWR]
→
[L’ HIPWR]
→
[C HIPWR]
→
[H’ HIPWR]
→
[H HIPWR]
Adjust: [
✳✳✳✳
]
PTT: ON
Press [ ] key to store
the adjustment value.
1) Adj item: [High
Transmit Power]
2) Adj item: [Low],
[Low’], [Center],
[High’], [High]
PTT: Press
[Transmit] button.
Press [Apply All]
button to store the
adjustment value.
[L HIPWR]
: 30W K, 45W HK
[L’ HIPWR]
: 30W K, 45W HK
[C HIPWR]
: 30W K, 45W HK
[H’ HIPWR]
: 25W K, 40W HK
[H HIPWR]
: 25W K, 35W HK
±1.0W
9.0A or less K
13.0A or less HK
[PC test mode]
Press [Apply All]
button to store the
adjustment value
after all adjustment
point was adjusted.
4. Low
Transmit
Power
adjust
1) Adj item: [LOPWR]
Adjust: [
✳✳✳✳
]
2) Adj item:
[L LOPWR]
→
[L’ LOPWR]
→
[C LOPWR]
→
[H’ LOPWR]
→
[H LOPWR]
Adjust: [
✳✳✳✳
]
PTT: ON
Press [ ] key to store
the adjustment value.
1) Adj item: [Low
Transmit Power]
2) Adj item: [Low],
[Low’], [Center],
[High’], [High]
PTT: Press
[Transmit] button.
Press [Apply All]
button to store the
adjustment value.
5.0W K
10.0W HK
±0.5W K,
±1.0W K2
5.0A or less K
8.0A or less HK
[PC test mode]
Press [Apply All]
button to store the
adjustment value
after all adjustment
point was adjusted.