Filter
Top Products
6
2 GETTING ACQUAINTED
[SCAN (SG.SEL)]
Press to start or stop the Scan function {page 48}.
Press and hold to select a Scan group {page 51}.
[MENU]
Press to enter Menu mode {page 14}.
[CH1 (REC)]
Press to play back a CW {page 36} or voice message
(requires VGS-1 option) {page 62}. Press and hold to
record a CW {page 35} or voice message (requires
VGS-1 option) {page 62}.
[CH2 (REC)]
Press to play back a CW {page 36} or voice message
(requires VGS-1 option) {page 62}. Press and hold to
record a CW {page 35} or voice message (requires
VGS-1 option) {page 62}.
[CH3 (REC)]
Press to play back a CW {page 36} or voice message
(requires VGS-1 option) {page 62}. Press and hold to
record a CW {page 35} or voice message (requires
VGS-1 option) {page 62}.
[RX/4 (REC)]
Press to play back a CW {page 36} or voice message
(requires VGS-1 option) {page 62}, or the constantly
recorded signal (requires VGS-1 option) {page 63}.
Press and hold to activate the constant recorder
(requires VGS-1 option) {page 63}.
—— G ——
[AGC/T (SEL)]
Press to toggle the fast or slow response time for
the Automatic Gain Control (AGC) {page 30}. In FM
mode, press to cycle through the Tone settings: Tone,
CTCSS, CTCSSx, or OFF {page 26}. When Tone is
activated in FM mode, press and hold to select a Tone
frequency {page 26}. When CTCSS is activated in FM
mode, press and hold to select a CTCSS frequency
{page 27}.
[CW T. (AGC OFF)]
Press to start CW auto tuning {page 23}. Press and
hold to turn AGC OFF {page 30}.
[RIT]
Press to turn the RIT (Receive Incremental Tuning)
function ON or OFF {page 30}.
You can assign a function to this Programmable
Function key {page 56}.
[XIT]
Press to turn the XIT (Transmit Incremental Tuning)
function ON or OFF {page 32}.
You can assign a function to this Programmable
Function key {page 56}.
[CL]
Press to clear the RIT/ XIT frequency to zero
{pages 30, 32}.
You can assign a function to this Programmable
Function key {page 56}.
RIT/ XIT control
When the RIT/ XIT function is ON, turn to adjust
the offset frequency. The RIT/ XIT offset frequency
appears on the sub-display {pages 30, 32}. While
scanning, turn to adjust the scan speed.
—— H ——
SQL control
Turn to select the desired squelch level {page 12}.
NOTCH control
Turn to select the desired Notch frequency {page 41}.
MULTI/CH control
In VFO mode, rotate to step the operating frequency
up or down {page 29}. In Memory Channel mode,
rotate to select a Memory Channel {page 43}.
Also, used for selecting Menu numbers when
accessing the Menu mode {page 14} and for various
confi gurations. The MULTI/CH LED lights when the
MULTI/CH control is not being used to adjust the step
frequency.
You can assign a function to this Programmable
Function key {page 56}.
HI/SHIFT control
Rotate to adjust the DSP fi lter bandwidth (high-cut) or
to adjust the DSP fi lter bandwidth (fi lter band shift)
{page 40}.
LO/WIDTH control
Rotate to adjust the DSP fi lter bandwidth (high-cut or
shift) {page 40}.
AF control
Turn to adjust the AF gain level {page 10}.
RF control
Turn to adjust the RF gain level {page 10}.
A
B
CD FE
G
H