Filter
Top Products
5 - 6
5. PARAMETERS
Class No. Symbol Name and function
Initial
value
Unit
Setting
range
Control
mode
Basic parameters
1*OP1
Function selection 1
Used to select the input si
g
nal filter, pin CN1B-19 function and
absolute position detection system.
Input signal filter
If external input signal causes chattering
due to noise, etc., input filter is used to
suppress it.
0:None
1:1.777[ms]
2:3.555[ms]
3:5.333[ms]
CN1B-pin 19's function selection
0:Zero Speed detection (ZSP)
1:Electromagnetic brake interlock (MBR)
Selection of absolute position detection system
(Refer to Chapter 15)
0: Used in incremental system
1: Used in absolute position detection system
CN1B-pin 18's function selection
0: Alarm (ALM)
1: Dynamic brake interlock (DB)
When using the external dynamic brake with 11kW
or more, make dynamic brake interlock (DB) valid.
0002
Refer to
Name
and
function.
P S T