Filter
Top Products
95741 Sixth Edition 5-39
Shipping Insert
Note: Do not turn the screwdriver CW when preparing the drive for a shipping insert.
5. Slowly turn the screwdriver CCW to raise the reel motors and to lower the cleaning
brush.
Note: When the MUD screw will not turn any further, the reel motors are raised and the
cleaning brush is lowered.
6. Remove the screwdriver.
7. Insert and lock the shipping insert in the 9840 Tape Drive.
Note: Some force must be used to insert the shipping insert past the feed roller.
8. Gently pull the shipping insert outward to verify it is locked within the carriage.
1. Shipping insert
2. Feed roller
3. Input bin
4. Cartridge stop mechanism
5. Feed channel
9. Send the defective CSL to StorageTek.
C53672
C5367
1
1
2
4
3
5