Filter
Top Products
Fibre Channel Change Configuration
6-22 Sixth Edition 95741
Save Configuration Submenu
Save/IPL ? This submenu appears only if the
drive configuration was changed.
Saving CFG displays for 2
seconds after pressing
Select.
After saving configuration,
a Fibre Channel drive
automatically performs IPL.
Save Fails displays for RAM
problems. See Table 7-2 on
page 7-3 for instructions.
1. Press
Select (Yes) to save changes
and initiate IPL; or,
2. Press
Menu (No) to cancel
changes.
Exit Configuration Submenu
Exit CFG ? This submenu allows you to exit
CFG, or to repeat the CFG
submenus.
1. Press
Select (Yes) to exit CFG, or
2. Press
Menu (No) to loop back to
the Compress Mode Submenu.
Main Exit Main Menu
Exit Menu? This menu allows you to exit the
menu system, or to stay in, with
an opportunity to return the drive
to Online before exiting the menu
system.
If the drive is not returned to
Online before exiting the menu
system, the display will flash
Offline every few seconds as a
reminder that drive is still Offline.
1. Press
Select (Yes) to exit the
menu system, or
2. Press
Menu (No) to return to the
Online/Offline main menu.
3. If applicable, IPL the drive to
invoke the changes.
Table 6-1. Menu Table—Fibre Channel Configuration (Continued)
Options Notes Procedure