Filter
Top Products
Rack-mountable Tray
3-48 Sixth Edition 95741
10. Route the cable(s) to the hub or switch and connect it to an open port.
Note: If you are connecting directly to a host, do not connect the cable at this time. This
will be done in a later section.
11. Repeat Step 3 through 10 for each additional Fibre Channel drive or CSL in the rack.
12. Go to “Power-On Rack” on page 3-52 if you are only installing Fibre Channel drive/CSL
trays.
1. Power cord
2. Fibre Channel cable
C53519
1
2