Filter
Top Products
95741 Sixth Edition 6-13
Fibre Channel Change Configuration
Table 6-1 provides detailed instructions to change configuration of a Fibre
Channel drive when the drive is offline.
Table 6-1. Menu Table—Fibre Channel Configuration
Options Notes Procedure
Online/Offline Main Menu
Online/
Offline
Defaults to Online at power-on.
Offline must be selected to
change configuration settings.
OffLn Pend may display while
waiting for a system response or
diagnostics completion.
1. If required, press
Menu repeatedly
until Online or Offline is
displayed.
2. If Online, press
Select to toggle
option to Offline.
3. Press
Menu to advance to the Port
A Enable/Disable menu.
Port A Enable/Disable Menu
Port A ENA
Port A DIS
Defaults to enabled (ENA).
Port A enabled. (Normal for
single port configuration.)
Port A disabled (DIS).
DIS Pend or ENA Pend may
display while waiting for a system
response.
1. Press
Menu to bypass, or
2. Press
Select to toggle option;
then, press
Menu to set, and
advance to the Port B Enable/
Disable menu.
Note: Manufacturing ships drive with the Port A ENA option selected.
Port B Enable/Disable Menu
Port B ENA
Port B DIS
Defaults to ENA.
Port B enabled.
Port B disabled. (Normal for
single port configuration.)
DIS Pend or ENA Pend may
display while waiting for a system
response.
1. Press
Menu to bypass, or
2. Press
Select to toggle option;
then, press
Menu to set, and
advance to the Change
Configuration (Chng CFG) Main
Menu.
Note: Manufacturing ships drive with the Port B ENA option selected.
Change Configuration Main Menu
Chng CFG ? This is the entry point to the
Configuration submenus.
1. Press
Select to enter
Configuration submenus, or
2. Press
Menu to bypass.