10
• Allowatleastthreeinches(7.5cm)ofclearanceaboveandtoeach
side of the processor for ventilation. Do not obstruct the area around
the processor so that excess heat can dissipate through normal air
circulation. Avoid placing the processor on a soft surface, such as
plush carpeting, that may restrict airow.
Important!
Obey all placement considerations. Not obeying the
placement considerations may result in damage that is not
covered under the warranty.
CT-SSP rack-mount
installation
FORRACKMOUNTINGINSTALLATIONCONTACTYOURCLASSÉ
PROFESSIONAL.
CT-SSP stand-alone
installation instructions
NON-RACK-MOUNT INSTALLATION FOR SSP:
1a. Install (4) feet and secure with (4) #6 at washers and
(4) 6-32 X 9/16 philips pan head screws.
Tighten to
5.0 in-lbs (0.56 N-m)
Optional accessory feet can be purchased and installed as below.