Classe Audio SSP-800/CT-SSP Car Speaker User Manual


  Open as PDF
of 70
 
58
using CAN-Bus CAN-BusiscontrolledviathetouchscreenofanyDeltaorCTseries
component.ereisnomastercomponent,soDelta/CTseriessystemswhere
two or more units have a touchscreen can be controlled through any of the
touchscreens.However,itisprobablyeasiesttostartusingCAN-Busthrough
just one.
CAN-Busisaccessedbypressingthemenu button on the face of the unit or
remote, then the status button, followed by the more button.
e touchscreen will then display the CAN-Bus devices screen, which lists
connectedDelta/CTseriescomponentsbymodel&serialnumber.
Highlighting aunitontheCAN-Busdevicesscreenidentiesitasthetarget
unit. e front panel LEDs of the target unit will start ashing (unless you
highlighttheunitthatyouareusingtoaccessCAN-Bus).
Once you have chosen the target unit press select.etargetunit’sLEDswill
stopashingandthetouchscreenwilllisttheCAN-Busfeaturesavailabletoit.
SomeCAN-Busfeaturesaresharedbyallmodels,somearespecictoindividual
models.
CAN-Bus shared features efollowingCAN-Busfeaturesaresharedbyallmodels.
 previous next