Classe Audio SSP-800/CT-SSP Car Speaker User Manual


  Open as PDF
of 70
 
1414
MENU
SSP-800
MUTE
MENU
MUTE
1
2
5
6
43
Front Panels
efrontpanelsoftheSSP-800andCT-SSPareshownabove.enumbersin
the drawing refer to the descriptions that follow.
1 Standby/On Button and Status Indicator
Pressing the Standby button puts the SSP into standby mode – a low-
power state which leaves the Surround Sound Processor and outputs
inactive but still allows the processor to respond to system commands via
anyofthesupportedcontrolprotocols(IRinput,CAN-Bus,RS-232,or
triggers).
If the processor is already in Standby mode, pressing the Standby button
fully powers up the SSP.
• LEDOn–theSSPisinStandbymode,orthedisplayhastimed
out due to a display setting.
 previous next