Filter
Top Products
25
4 Preset Config (Configuration) Button
is button steps through the congurations set to “in use”. If there is
already a conguration active (due to being a default) for a particular input
it will be overridden until the input is selected again, or the user selects
that default conguration.
5 Volume Control & Mute Buttons
e Volume Up and Down arrow buttons increase or reduce the overall
volume level of the audio output. e Mute button controls the system
volume level. Pressing the Mute button reduces the audio output volume
level by a pre-determined amount. You can customize selected features of
both the Mute button and volume level. Refer to the Volume description in
the Menu System section found later in the manual for further instructions.
6 Navigation & Menu Buttons
e central section of the remote control contains the navigation buttons
and the menu access buttons. is array of buttons is used for navigating
the menu system on the SSP. Each of the buttons performs the following
function(s):
• Menu accesses the main screen for the menu system, in the same
fashion as the front panel Menu button.
• Home returns the touchscreen display to the Home page, which
presents the normal operation options – Source, Mode, Video
Preview, and Controls. e Home button essentially acts like a
“backtostart”button–nomatterhowdeeplyyou’venavigated
into the menu system, a simple button push returns you to the
front page.
• Navigation Arrows are the Up (p), Down (q), Left (t),
and Right (u) arrow buttons, which allow you to select, by
highlighting, the dierent menu options with the menu system.
• Enter selects options. Pressing the Enter button selects the
highlighted menu item in any menu screen.
• Prole button accesses the Prole page(s). Proles are customized
versionsofthesystem’sHome screen. You can name these proles
and pre-program them so you have direct access to frequently
used controls. See the Proles description in the Menu System
section found later in the manual for more details.
• Trim button accesses the System Trims menu screen, which allows
you to make temporary adjustments to speaker levels and the lip
sync feature. ese temporary trims do not override the settings
you made through the Setup menu and are discarded when you
select a new source. See the Menu System section found later in
the manual for more details.
7 Function Keys (F1 to F4)
e last four buttons on the remote control are the Function buttons,
or FKeys, which provide additional exibility to the SSP remote control.
ink of them as “favorite” buttons that provide direct access to a specic
function or command not covered by the other buttons. Refer to the
Remote Function Buttons description in the Menu System section found
later in the manual for more information.