Classe Audio SSP-800/CT-SSP Car Speaker User Manual


  Open as PDF
of 70
 
46
room EQ eSSP-800/CT-SSPRoomEQcapabilityallowsyoutobuildveryprecise
digital audio lters to help compensate for xed sonic irregularities in your
room. ese lters should be constructed based upon audio measurements made
by a well-qualied acoustical engineer. ese powerful lters are made available
in a completely manual fashion to help your professional installer give you the
best listening experience possible.
As many as ve lters can be built for each speaker channel, except the Aux
channels dened for Bi-Amp or downmix. A Bi-Amp channel assumes the same
lters as dened for the Front Left and Right partner channels.
InordertodenetheRoomEQlters,selectRoom EQ from the Setup Menu.
Choose which channel(s) you wish to adjust. Individually select and activate a
band,thentuneitwiththeappropriatecenterfrequency,Q,andgain.Pressing
the select button for a particular speaker will result in full range pink noise being
generated from that channel. Measurement tools may then be used to determine
whatchangesifanyareneeded.Notethatthevolumelevelforthepinknoise
is adjustable using the master volume control. Once the appropriate number of
bands have been activated and tuned, use the Activate Group button to turn the
lters on and o as a before/after check on your progress for the channel.
You do not need to have lters dened for every channel. e installer need
onlymaketheadjustmentstothechannelsnecessarytocorrectfortheroom’s
interaction. We encourage you to consult with your authorized Classé dealer to
properly calibrate the SSP Room EQ function.
configuration Your SSP has default settings for each speaker, but these settings should be
adjusted to match your system for optimal results. You may want to consult
your authorized Classé dealer to precisely adjust the settings to match your room
environment.Onyourown,youcanidentifyeachspeaker’sdistancefromyour
seatingposition,butit’simpossibletomakeaccuratespeakerlevelcorrectionsby
ear.Yourdealer’stechnicianusesanSPLmeterorspecializedroommeasurement
software to optimize levels and adjust speaker equalization, a powerful tool to
helpoptimizeyourroom’sinteractionwithyourspeakers.
e Conguration Setup menu allows you to dene up to six dierent
speakercongurations.Touchthebuttonforthespeciccongurationyou
want to set up to open the conguration setup menu, shown on the right.
e menu contains four buttons that completely dene the conguration
– Name, Distance, Levels, and Speakers – plus a fth button that activates the
conguration. e same menu is used to set up each conguration.
 previous next