Filter
Top Products
33
Using the SSP-800/CT-SSP
YourSSP’sversatiletouchscreenLCDsupportsmostofyourday-to-day
operations and provides access to a exible menu system for setup functions
thataren’taccessedasoftenasothers.Althoughusingthetouchscreenisquite
intuitive,themenusystemisextensive.issectionoftheowner’smanual
outlines the use of this touchscreen in day-to-day operation of the system.
When you bring the SSP out of its Standby mode, the touchscreen displays an
“initializing” message and then switches to the Home page of the menu system,
as shown below.
e Home page displays four options – Source, Video Preview, Mode, and
Controls – on the top half of the screen. e bottom half of the screen displays
the active input, surround processing mode, plus the current volume level (in
both a graphical bar across the bottom of the screen and as a large numeric
decibel value). is is the starting page for all of the day-to-day operations of the
SSP and can be quickly accessed at any time by pressing the Home button on
the remote control.
source selection TouchingtheSource option opens the Source Select page. e SSP has a total of
20 selectable inputs, which are all interchangeable.
Touchanyinput button on the touchscreen to select it as the current input.
If the input you want to activate is not on this screen, press the More button
for the next page of input options. Or, press the Back button to return to the
previous page.
Continue to press the More button to scroll through the available active inputs.
When the screen with the last input is selected, the More button changes to a
Home button.
Ifyoudon’thavethismanysourcesinyoursystem,youcandeactivateany
unused inputs. When an input is deactivated, that input button is removed from
the Source selection menu. is can be useful as it reduces the number of input
options, making navigation and selection faster. See the Menu System for details
on deactivating unused inputs.