Classe Audio SSP-800/CT-SSP Car Speaker User Manual


  Open as PDF
of 70
 
65
Care & Maintenance
ToremovedustfromthecabinetofyourSurroundSoundProcessor,usea
featherdusteroralint-freesoftcloth.Toremovedirtandngerprints,we
recommend isopropyl alcohol and a soft cloth.
Dampen the cloth with alcohol rst and then lightly clean the surface of the
Surround Sound Processor with the cloth. Do not use excessive amounts of
alcohol that might drip o the cloth and into the Surround Sound Processor.
Caution! Power down and remove the AC power cord from the
SSP before performing maintenance. At no time should liquid
cleaners be applied directly to the Surround Sound Processor,
as direct application of liquids may result in damage to
electronic components within the unit.
input factory defaults For your convenience, here are the factory default settings for the
SSP-800/CT-SSPSurroundSoundProcessor.
Input # Default Audio Connector Default Video Connector
1 Coaxial Digital 1
None
2 Coaxial Digital 2
None
3 Coaxial Digital 3
None
4 Coaxial Digital 4
None
5
Optical Digital 1
None
6 Optical Digital 2
None
7 Optical Digital 3
None
8 Optical Digital 4
None
9 XLR Analog 1
None
10 RCA Analog 2
None
11 RCA Analog 3
None
12 Coaxial Digital 1
None
13 Coaxial Digital 2
None
14 Coaxial Digital 3
None
15 Optical Digital 1
None
16 Optical Digital 2
None
17 Optical Digital 3
None
18 XLR Analog 1
None
19 RCA Analog 2
None
20 RCA Analog 3
None
 previous next