Filter
Top Products
55
remote Fkeys eremotecontrolsuppliedwiththeSSP-800/CT-SSPhasfourfunction keys
(Fkeys), each of which gives you instant access to a specic system function that
might otherwise be buried in the menu system.
For example, if you use the balance control frequently, you may want to consider
programming one of the Fkeys to directly access the balance control. By saving
the balance control as an Fkey function, you do not need to access the controls
page and then choose system trims, level trims, L/R balance to change the
parameter.
e remote control F1 to F4 buttons correspond to the Function Keys displayed
on the touchscreen. Select the Function Key that you would like to program,
en to select the one you want simply scroll through the list (by touching
either the up or down arrows on the right), and then touch the specic function
you want that Fkey to perform.
important note on Fkey use
All Classé remote controls provide these same four Fkeys, so that you need not
worry about which remote you happen to pick up. us F1 on the Surround
SoundProcessor’sremotecontrolsendsthesameinfraredsignalasF1 on the
DVDplayer’sremotecontrolandsoon.
While this is intended to minimize confusion amongst dierent remotes (since
this aspect of them will all perform identically), you should take care when
assigning dierent functions on dierent components to the same Fkey. Doing
so can result in two components doing two dierent things at once, in response
to a single press of a button on the remote control. is can sometimes be
useful. As an example, F1 could set the Surround Sound Processor to the DVD
input, and also set the DVD player to Play, both from the press of a single Fkey.