Classe Audio SSP-800/CT-SSP Car Speaker User Manual


  Open as PDF
of 70
 
19
4 HDMI Outputs
e SSP supports two HDMI outputs, labeled 1 and 2. e
SSP HDMI outputs support HDMI v1.4a featuring 2D and standard
3D video formats at resolutions up to 1080p @ 24/50/60 fps, Audio
Return Channel (ARC), HDMI Ethernet Channel (HEC), Deep Colour,
x.v.Color(xvYCC) and provides a 2-channel SPDIF downmix of the source
material.
Non-HDMIsourcematerialisencodedforanHDMIdisplayatthe
source’snativevideorate.ByHDCPlicenseagreement,HDMIinput
signalscanNOTbeconvertedtoanalogformat,andareonlyoutputvia
HDMI at the incoming resolution.When an analog video input signal is
output via HDMI to the display, the video input is converted to digital
formatandoutputatitsnativerate.etwoHDMIoutputsareNOT
independent.
NOTE: HDMI is an interactive format, which can occasionally
cause format errors between the source devices and the output
display. If you connect the SSP HDMI outputs to two dierent
displays, the HDMI source automatically provides a signal
compatible for both displays. In some cases, this response can result
in less-than-optimal resolutions for one or both displays.
5 Component Video Output
e SSP is equipped with component video output via 3 RCA connectors
labeled Pr, Pb, and Y. Use this connection to connect to non-HDMI
displays. e component output does not support output of 1080p signals.
NOTE: Due to HDCP licensing restrictions the component video
output will not work with most source material input via HDMI.
6 Digital Audio Inputs - Coaxial
e SSP supports four digital audio inputs, with SPDIF connectors labeled
COAX1 to COAX4. ese inputs accept PCM data streams up to
24-bits long and up to 192 kHz sampling frequency. We recommend using
cables that are optimized for digital audio signal transfer and that carry a
75 Ω impedance rating. Your Classé dealer can help you with proper cable
selections.
7 Digital Audio Inputs - Optical
eSSPsupportsfourdigitalaudioinputs,withopticalTOSlink
TM
connectorslabeledOPT1toOPT4.eseinputsacceptPCMdata
streams up to 24-bits long and up to 192 kHz sampling frequency. We
recommend using cables that are optimized for digital audio signal transfer.
Your Classé dealer can help you with proper cable selections.
NOTE: e bandwidth limits of TOSlink™ components are very
much strained at a 192 kHz sampling frequency. For that reason
we recommend keeping the TOSlink™ connections at a maximum
rate of 96 kHz.
 previous next