Filter
Top Products
20
Audio level meter display
11
33
55
77
22
44
66
88
SDI1 1080/60i
Channel
display
Reference point
0 dB point
Peak hold
Overrange
A color skeleton bar meter indicates the audio •
level for SDI signals and HDMI signals.
The display method of the audio level meter can •
be set in the menu (page 49).
In 3D assist mode, the audio of the SDI1 (L) side •
is indicated.
Display color
Green: Up to reference point (included)
Yellow: Reference point (not included) to 0 dB point
Red: Overrange
Time code (TC) display
( : ) NDF
( . ) DF
Use the menu to display the time code for HD-SDI •
signal input. It also allows you to switch display
mode (VITC, LTC, VUB, LUB). (page 50)
In VITC and LTC display mode:
Displays the time code in hours: minutes: •
seconds: or frames.
In drop-frame mode, a different delimiter between •
seconds and frames is used.
Note :
Read errors are displayed as “--:--:--:--”
In VUB and LUB display modes:
BG8, BG7, BG6, BG5, BG4, BG3, BG2, BG1 •
appear in the stated order.
BG: binary group
The (:) delimiter does not appear.•
Note :
Read errors are displayed as “--:--:--:--”
On-screen Display
(continued)