Filter
Top Products
23
User Data
You can save and load up to five combinations of menu settings and adjustments made with the picture
adjustment knob as user data. You can also return settings and adjustments to their factory defaults. User
data include the following settings.
Menu settings except “SETUP LOAD/SAVE” and “REMOTE in CONTROL” (including button function •
settings on the monitor front panel)
Screen adjustments made with the picture adjusting knob•
Saving user data
Press [MENU] to display the MAIN menu.1.
Press [ 2.
][ ] to select the “SYSTEM CONFIG”
menu and press [ENTER].
Press [ 3.
][ ] to select the “SETUP SAVE”
sub menu and press [ENTER].
The setting in the sub menu changes to green.
MENU
EXIT
SEL.
ENTER
ENTER
[SYSTEM CONFIG]
SUB WINDOW
MENU POSITION
STATUS DISPLAY
BATTERY REMAIN
WARNING VOLTAGE
SETUP LOAD
SETUP SAVE
POWER ON SETUP
COLOR SPACE
POWER SAVE MODE
CALIBRATION
AREA SETTING
FULL
CENTER
3SEC OFF
OFF
TYPE1
FACTORY
USER1
LAST
EBU
OFF
NTSC
Changes to green
Press [ 4. ][ ] to select a “USER1” to “USER5”
file to save the settings to and press [ENTER].
The following screen appears.
MENU
EXIT
SEL.
ENTER
ENTER
[
SETUP SAVE
]
USER1
YES
NO
Select “YES”, and press [ENTER].5.
This saves the user data.
To return to the previous screen, press 6.
[MENU].
Loading user data
Press [MENU] to display the MAIN menu.1.
Press [ 2.
][ ] to select the “SYSTEM CONFIG”
menu and press [ENTER].
Press [ 3.
][ ] to select the “SETUP LOAD”
sub menu and press [ENTER].
The setting in the sub menu changes to green.
MENU
EXIT
SEL.
ENTER
ENTER
[SYSTEM CONFIG]
SUB WINDOW
MENU POSITION
STATUS DISPLAY
BATTERY REMAIN
WARNING VOLTAGE
SETUP LOAD
SETUP SAVE
POWER ON SETUP
COLOR SPACE
POWER SAVE MODE
CALIBRATION
AREA SETTING
FULL
CENTER
3SEC OFF
OFF
TYPE1
FACTORY
USER1
LAST
EBU
OFF
NTSC
Changes to green
Press [ 4. ][ ] to select a “USER1” to “USER5”
file to load and press [ENTER].
The following screen appears.
To return to the factory defaults, select •
“FACTORY.”
MENU
EXIT
SEL.
ENTER
ENTER
[
SETUP LOAD
]
USER1
YES
NO
Select “YES”, and press [ENTER].5.
This loads the user data.
To return to the previous screen, press 6.
[MENU].