Filter
Top Products
40
Main Menu
(continued)
FUNCTION setting restrictions
■
Under the following conditions, “INVALID FUNCTION” is displayed and the settings cannot be configured.
Settings Inoperable Condition or Mode
HV DELAY SUB WINDOW•
WFM•
PIXEL TO PIXEL•
3D ASSIST•
When HDMI (640 x 480) input•
GAMMA SELECT When GPI is set•
When HDMI (640 x 480) input•
SD ASPECT When GPI is set•
SUB WINDOW (Still image)•
3D ASSIST•
When HDMI (640 x 480) input•
SCAN When GPI is set•
SUB WINDOW•
PIXEL TO PIXEL•
3D ASSIST•
When HDMI (640 x 480) input•
SUB WINDOW 3D ASSIST•
When HDMI (640 x 480) input•
WFM/VECTOR (VECTOR is not displayed when other than SDI1 or SDI2 input)
SUB WINDOW•
PIXEL TO PIXEL•
3D ASSIST•
When HDMI (640 x 480) input•
MARKER When GPI is set•
SUB WINDOW•
3D ASSIST•
When HDMI (640 x 480) input•
WHITE BALANCE When other than VAR1 to VAR3 selected in COLOR TEMP.
PIXEL TO PIXEL (Enabled when 1080i/p signal input)
When other than 1080i/p signal input•
SUB WINDOW•
3D ASSIST•
FOCUS-IN-RED When WFM is ON•
When GPI is set•
When INT-SG is selected•
LEVEL METER When other than SDI1, SDI2, or HDMI input
MONO When GPI is set•
When HDMI (640 x 480) input•
TIMECODE When other than HD-SDI input
CLOSED CAPTION When HDMI (640 x 480) input•
When VF signal input•
When YP•
B
P
R
signal input
3D ASSIST•
The function assigned to FUNCTION3 does not work when you operate the unit in 3D assist mode •
because the FUNCTION3 button becomes specifically for switching to 2D picture adjustment mode (2D
ADJUST).