Panasonic BT-LH910G Car Video System User Manual


 
21
On-screen Display
(continued)
Closed caption (CC) display
Closed caption
display area
Closed caption
display area
(When the specified
window extends out of
the entire screen)
CLOSED CAPTION can be displayed when SDI
signals and VIDEO signals are input.
CLOSED CAPTION complies with the following
standards.
Composite Standard EIA/CEA-608 (VBI)
SD-SDI CC Standard EIA-608 (ANC)
HD-SDI CC Standard EIA-708
In the case of EIA-708, display is possible at a
position simultaneously specified for multiple
windows (up to 8).
The display position is within a display area that
is located inside the entire screen. (Refer to the
following notes.)
The display settings can be configured in the menus.
You can also select the type of CLOSED CAPTION,
display channel (EIA/CEA-608), and display service
(EIA/CEA-708) in the menus. (page 50)
Notes:
The specified window position is displayed as a
position within the display area depending on the
CLOSED CAPTION information.
The window may extend out of the display area
depending on the specified window position and
size. In such a case, the window will be displayed
but if the window also extends out of the entire
screen, the display position of the window will be
changed so that the window is displayed inside
the entire screen.
DC power supply voltage and battery level display
DC14.0V 50%
DC power supply voltage is displayed.
The battery level display is displayed when the
battery you are using is an Anton/Bauer battery
with a battery level display function.
Displayed when the operating status display is not
displayed.
The display can be set in the menus. (page 34)
Notes:
The DC power voltage and battery level serve
as a near end warning indication as they flash
when the level falls to the value set in the menu or
lower.
Furthermore, when the level drops to less than
approximately 10.0 V, the “END BATTERY”
battery level error is displayed in red, and
the unit performs the shutdown process after
approximately 3 seconds have elapsed.
With some batteries, operation may be stopped
by an over discharge function of the battery
itself before the battery level error of the unit is
displayed.
We recommend replacing the battery as soon as
possible.