Filter
Top Products
33
Main Menu
(continued)
GAIN/BIAS RGB direct adjustment mode
■
If you press [ENTER] when the [GAIN] or [BIAS] item is selected in the WHITE BALANCE VAR (1 to 3)
menu, the screen switches to the one below and you can use the picture adjusting knobs to directly adjust
the RGB while checking the picture.
R is assigned to knob 1, G to knob 2, and B to knob 3.
If “WHITE BALANCE” is assigned to FUNCTION1 to FUNCTION3, this mode can also be accessed from
the FUNCTION buttons.
R-GAIN G-GAIN B-GAIN
489 511 456
CONT./
B.LIGHT
VOLUME/
BRIGHT
PEAK/
PHASE
CHROMA
F-IN-R
You can switch between GAIN and BIAS by •
pressing the corresponding knob.
If you press [ENTER] in the [GAIN] menu, GAIN •
adjustment is displayed first.
If you press [ENTER] in the [BIAS] menu, BIAS •
adjustment is displayed first.
When you access the mode from a FUNCTION •
button, GAIN adjustment is displayed first.
The adjustment item name and the numerical •
value of the element is displayed above each of
the knobs.
Press the [MENU] button to return to menu •
display. *
1
If you switched the mode with a FUNCTION •
button, display disappears if you press the
FUNCTION button. *
1
The same operation is also performed after 10
*
1
seconds of inaction.