Filter
Top Products
6 – Basic Operations–Punch-in and punch-out
TASCAM DA-98HR 39
6.6.9 Reviewing the punched material
1 To replay the punch-in, press the PLAY key.
Playback start (the
REC FUNCTION indicators
of the armed tracks will continue to flash).
2 At the post-roll point, the tape automatically
rewinds to the pre-roll point.
3 If you want to record the punch-in again, press
the
AUTO PUNCH key M so that the indicator
flashes, and repeat the process described
above.
4 If you are satisfied with the punch-in, follow
the steps below, otherwise, press
LOC 1 to
return to the punch-in point, press the
AUTO
PUNCH
key so that the indicator flashes, and
repeat the take.
6.6.10 Exiting punch-in mode
1 Disarm any armed tracks (press the REC
FUNCTION
keys so that the indicators go out).
2 Press the CLEAR key G to exit the AUTO
PUNCH (or rehearsal) mode.
The punch points are still retained in memory.
3 You can press the
AUTO MON key so that the
indicator goes out and normal monitoring
modes are now in effect (5, “Monitoring
modes”). However, leaving the unit in AUTO
MONITOR mode may be more useful while
recording.