Filter
Top Products
Table of Contents
TASCAM DA-98HR 5
7.1.2 Checking, editing and manually entering
MEMO 1 and MEMO 2..........................................40
7.1.3 Setting the location pre-roll time..................40
7.1.4 Locating to MEMO 1 and MEMO 2................41
7.2 Function key location memories ................ 41
7.2.1 Storing a function key location memory......41
7.2.2 Editing function key memories.....................41
7.2.3 Locating to a function key memory..............41
7.2.4 Location and playback ..................................42
7.2.5 Repeat function..............................................42
7.2.6 To start repeat play........................................42
7.3 Track delay.................................................... 42
7.3.1 To set the track delay: ...................................43
7.4 Crossfade time ............................................. 43
7.5 Vari speed (pitch control)............................ 43
7.5.1 To set a non-standard speed ........................43
7.5.2 Resetting the speed to standard ..................44
7.6 Shuttle operations........................................ 44
7.6.1 Shuttle monitoring .........................................44
7.6.2 Shuttle muting................................................45
7.7 Reference levels........................................... 45
7.8 Meter modes ................................................. 45
7.8.1 Peak hold time................................................45
7.8.2 Meter ballistics ...............................................45
7.9 Sine oscillator............................................... 46
7.9.1 Recording the oscillator................................46
7.10 Digital recording......................................... 46
7.10.1 Selecting different inputs for recording.....46
7.10.2 Selecting input word length ........................46
7.10.3 Setting the high-frequency AES/EBU I/O
transfer mode.......................................................47
7.10.4 Cbit mode......................................................47
7.11 REC MUTE (recording silence) ................. 47
7.11.1 Viewing user bits..........................................47
7.12 Dither........................................................... 48
7.12.1 Selecting dither settings .............................48
7.13 Output word length .................................... 48
7.14 Disabling automatic muting...................... 48
7.15 Setting the power-on message ................. 49
8 – DTRS synchronization
8.1 Synchronization connections ..................... 50
8.2 Machine ID and master/slave settings ....... 50
8.2.1 Differences between DTRS models..............50
8.2.2 Setting machine ID.........................................51
8.2.3 Master/slave settings (CHASE mode) ..........51
8.3 DTRS emulation............................................ 51
8.4 Machine offset .............................................. 52
8.4.1 Setting machine offset...................................52
8.4.2 Cancelling machine offset.............................52
8.4.3 Setting machine offset “on the fly”..............52
8.4.4 An example of setting offsets.......................52
8.4.5 Clock mode.....................................................53
8.5 Digital dubbing..............................................54
8.5.1 Synchronized formatting...............................54
8.5.2 Recording while formatting...........................55
8.6 Error messages.............................................55
9 – Operations related to timecode
9.1 ABS and SMPTE/EBU timecode ..................56
9.1.1 ABS time.........................................................56
9.1.2 Tape timecode................................................56
9.1.3 Selecting TC or ABS timing ..........................56
9.2 Tape timecode mode ....................................57
9.2.1 TcTrack setting ..............................................57
9.2.2 ABS setting.....................................................57
9.2.3 ABS-Ofs setting .............................................57
9.2.4 ABS-13 and ABS-23 settings ........................57
9.2.5 Checking tape TC...........................................58
9.3 Recording timecode......................................58
9.3.1 Selecting the timecode source.....................58
9.3.2 Recording timecode using the generator....59
9.3.3 Recording synthesized timecode from
ABS timing...........................................................60
9.3.4 Assembling timecode....................................60
9.3.5 External timecode sources ...........................60
9.3.6 Recording timecode from an analog
recorder................................................................61
9.3.7 Recording timecode from external
sources.................................................................61
9.3.8 Checking external timecode .........................62
9.4 Selecting the frame rate ...............................62
9.4.1 Pull up and pull down (Fs shift)....................62
9.5 Timecode input and output..........................62
9.5.1 Timecode input ..............................................63
9.5.2 Timecode output............................................63
9.5.3 Timecode output format................................63
9.5.4 Timecode input and output timing...............63
9.5.5 Using MIDI Time Code (MTC)........................64
9.6 Chasing to timecode.....................................64
9.6.1 Machine ID and timecode..............................64
9.6.2 Setting timecode offset .................................64
9.6.3 Setting timecode offset from the menu .......65
9.6.4 Cancelling timecode offset ...........................65
9.6.5 Setting timecode offset on-the-fly................65
9.6.6 Timecode accuracy........................................65
9.6.7 Park position ..................................................65
9.6.8 Automatic park position setting ...................65
9.6.9 Absolute and relative difference...................66
9.6.10 Rechasing timecode....................................66
9.6.11 Bypassing timecode errors.........................67
9.6.12 Individual recording while chasing
timecode...............................................................67
9.7 Video resolution............................................67
9.7.1 Video reference setting .................................68
10 – External control
10.1 Selecting the control source (protocol)....69