Filter
Top Products
14
5 Installation
Now that you have connected your receiver, and commenced
operation, you can turn to optimising the setting for your
personal preferences.
5.1 OSD Language
This menu item gives you the option of selecting the menu
language of your choice.
In order to change the OSD language, proceed as follows:
> Press the Menu key to call up the Main Menu.
(Fig.
5-1)
> Use the keys arrow keys up/down to select the
menu line OSD Language.
> Confirm by pressing OK.
The sub-menu OSD Language will be displayed.
> Use the arrow keys up/down to select the desired
language.
> Store the selection in memory by pressing OK.
> Press the Back key to return to the Main Menu.
5.2 Basic settings
In order to operate your DVB receiver as conveniently as
possible, you should make some adjustments to
accommodate your personal preferences.
> Press the Menu key to call up the Main Menu.
> Use the arrow keys up/down to select the line
Settings.
> Confirm by pressing OK.
The menu Settings will be displayed
(Fig. 5-2)
> Use the arrow keys up/down to select the line
Basic Settings.
> Confirm by pressing OK.
The menu Basic Settings will be displayed
(Fig. 5-
3).
> Use the arrow keys up/down to move around
within the menu, and to change the individual
positions as indicated. When selecting a menu item
please also note notices displayed on screen, where
applicable.
The following settings can be made:
(Fig. 5-1)
(Fig. 5-2)
(Fig. 5-3)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 14