Filter
Top Products
6.7 Display Time and Programme Information
This function allows you to view programme information
related to the programme currently selected.
> Press the blue key to display information for the
programme selected.
On the lower half of the screen you will see a display showing
current time, the name of the programme selected, as well as
the start and end times of the current programme, where
available from the broadcaster.
> If available, pressing the blue multi-function key will
display information relating to the next programme.
6.8 Additional Programme Information
Where available from the provider, additional programme
information can be obtained by pressing the function
Programme information.
> Press the yellow function key to open an additional
information window.
(Fig. 6-8)
You will again see information relating to the current
programme.
> Now press the yellow function key again to view
information relating to the next programme.
> Press the yellow key again to switch off the display.
6.9 Channel Information
> Press the green function key (Channel Information)
in order to view data relating to the channel selected.
(Fig. 6-9)
> The coloured multi-function keys can be used to obtain
and display additional Audio/Video information,
Programme information and, where relevant,
information on the encryption system used.
> Press the Back key to exit from the channel
information.
6.10 Videotext
6.10.1 Using the Videotext decoder of your televisi-
on set
Wherever this is broadcast, videotext will be available to your
TV set. Use the remote control of your TV set to work with
videotext. Should you experience problems with your TV set,
such as video text and picture content being superimposed,
you should set your receiver to FBAS mode (Point 5.3).
20
(Fig. 6-8)
(Fig. 6-9)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 20