Filter
Top Products
To block access to a programme, proceed as follows:
> Call up a programme list by pressing OK.
> Press the blue function key (Change).
> Now use the arrow keys up/down to select the
programme you wish to block/restrict.
> Now press the green function key to select the
function Parental Control.
A lock symbol will appear next to the programme
selected.
> If you wish, repeat the procedure until you have
blocked access to all programmes you wish to block.
> When you have completed configuring the programme
list according to your preferences in the manner
described above, press the Back key twice to return
to normal operation.
> In order to activate the parental control function, you
must still enter your personal PIN code under the
following point Changing the PIN, following which
you must switch on the parental control as described
in Point 5.2.1 (Parental Control).
7.2 Changing the PIN
The PIN code is set at the factory to 0000. In order to
activate the parental control function you must enter your own
personal PIN code in place of the factory setting.
Note! Do not forget your PIN code. If you do forget, plea-
se consult your authorised retailer!
In order to change the PIN code proceed as follows:
> Press the Menu key to call up the Main Menu.
> Use the arrow keys up/down to select the line
Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
> Use the arrow keys up/down to select the line
Change PIN, and confirm by pressing OK. The
menu Change Unit PIN will be displayed
(Fig. 7-4).
> Now use the numeric keypad to enter the current
PIN code (factory setting: 0000).
> Now use the numeric keypad to enter the new PIN
code. Repeat the entry.
> Once you have changed the PIN code in this manner,
press Back twice to return to normal operation.
Please note that you still need to activate the parental control
function, if desired, as described in Points 5.2.1 and 7.1.5.
28
(Fig. 7-4)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 28