Filter
Top Products
22
6.11.3 EPG Information
Where this is broadcast by the provider, the EPG function will
provide you with information on the contents of various
programmes:
> Use the arrow up/down keys to select the
appropriate programme.
> Press either the EPG key or the blue function key
(More) to display the information.
(Fig. 6-12)
Lengthy text passages can be moved
around by using the arrow up/down keys, or you
can page back and forth by using the arrow
left/right keys.
> Press the Back key to return to the previous table.
6.11.4 Exiting from EPG
> Press the Back key to return to normal operation.
6.12 Timer
Your receiver is provided with a timer. This enables you to
make video recordings even when you are absent. The timer
operation is indicated by a blinking LED in the display, which
serves as a control. Timer operation can be interrupted by
pressing the On/Standby key.
6.12.1 Programming by means of EPG
> Switch to the channel that carries the programme you
wish to record.
> Press the EPG key.
The EPG table of the currently selected programme
will be displayed
(Fig. 6-13).
> Use the arrow keys up/down to highlight the
desired programme.
> Press the yellow function key (Record).
The data relating to the selected programme will now
be stored, and will be displayed on screen for control
purposes
(Fig. 6-14)
> In order to delete the timer marking, press the
green function key (Delete) and confirm when
requested to on screen.
> Press the Back key to return to the EPG table, and
to add further programming if you so wish.
or
> Press the TV/Radio key to return to normal
operation.
At the programmed time the receiver will switch to the selec-
ted programme and will, if set appropriately, return to standby
mode at the end of the programme.
(Fig. 6-12)
(Fig. 6-13)
(Fig. 6-14)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 22