Filter
Top Products
38
For everyday use
Switching on and off
> Switch the receiver on by pressing the On/Standby
key, either on the receiver unit itself or on the remote
control.
> Press the key again either on the receiver unit or on
the remote control to switch the receiver off again.
> The receiver is now in Standby mode.
Programme selection
Using the Programme up/down keys
> Use the Programme up/down either on the
receiver unit itself or on the remote control to switch
the programmes up or down the programme list one
position at a time.
Using the numeric keypad
> Use the numeric keypad to enter the desired
programme number.
For example
1 for programme slot 1
1, then 4 for programme slot 14
2, then 3, then 4 for programme slot 234
When entering programme numbers with more than one digit
you have approx. 3 seconds time after pressing a key to
enter the next digit and complete the entry.
If you wish to enter only a single or double-digit number, you
can speed up the switching procedure by holding down the
key when you enter the last digit.
Volume adjustment
> You can adjust the volume of your receiver by
pressing the Volume + key to make the sound
louder, or the Volume - key to make it softer.
> Press the key Sound on/off to mute the sound,
press the key again to switch the sound back on.
TV/Radio switching
The pre-programming of your receiver covers radio as well
as television programmes. In Radio mode, the corresponding
TV picture is switched off, and only the programme name is
displayed on screen.
> Press the TV/Radio key to switch the receiver to
Radio mode.
The receiver will now switch automatically to the last
radio programme selected.
> Press the key TV/Radio again to return to the
television programme last selected.
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 38