Filter
Top Products
36
Mains power supply:
External mains connector: 12V / 600 mA
Power requirement:
< 10 W (in operation, incl. power feed to antenna)
Input Voltage:
12 V .... 15 V Direct current
General:
Ambient temperature +15°C...+35°C
Humidity < 80%
Dimensions (WxDxH): 158 mm x 115 mm x 47 mm
Weight: 0,5 kg
10 Trouble-shooting guide
Dear Customer,
we would like to point out once again that, if the following
fault occurs, you should first try to solve the problem yourself
in the manner described, before contacting your
service/repair specialist.
The receiver is not functioning properly (controls
do not respond, image frozen ...)
> Disconnect the mains power plug for approx. 5
seconds.
> Then switch the receiver on again.
If the problem persists further, contact your service technici-
an.
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 36