Filter
Top Products
Repeat (optional)
> Use the arrow key right to highlight the category
Rep.
> Confirm by pressing OK.
A selection window will be displayed, showing various
suggestions for repeats.
1x Timer on
T Daily repeat
1xW Repeat once per week
1-5 Daily repeat on workdays only
6-7 Daily repeat on weekends only
> Use the arrow keys up/down to select the desired
function.
> Press the OK to store the setting in memory.
Type
> Use the arrow key right to highlight the category
Type.
> Press the OK dto select the desired type in this line.
VCR
Your receiver will be switched on resp. off for the pro-
gramme you have selected. If the unit was switched
on by the timer, most of the functions of the remote
control will be deactivated, in order to prevent acciden-
tal interference with the recording.
Timer operation is indicated visually by the blinking of
the LED display for control purposes.
Noting function
Your receiver will switch itself on at the time you have
set as starting time, and will switch to the selected pro-
gramme slot. Unlike the case of the VCR setting, the
controls of the receiver remain fully functional and the
unit will not be switched off at the end of the program-
me.
> When you have completed the programming, press
the yellow function key (Accept), in order to
transfer the data to memory.
> Press the TV/Radio key to return to normal
operation.
Note!!!
Ensure that the information box indicates the correct time. If
this is not the case, switch to the ZDF or other major
programme, then go to Standby. Switch on the receiver and
leave it tuned to ZDF (or other programme broadcasting time
signal) for approx. 30 seconds, so that the correct current
time can be scanned into the receiver.
24
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 24