TechniSat DigiPal1 Car Video System User Manual


 
> Press the red function key (Delete).
The message “Do you really want to delete the
programme(s)?” will be displayed.
> Use the arrow keys left/right to select Yes or
No.
> Confirm by pressing OK.
7.1.4 Sorting programmes
To sort the programmes in your Favorites list in the order
most convenient to you, proceed as follows:
> Press the OK key to call up the Favourites list.
> Press the blue function key (Change).
> Now use the arrow keys up/down to select the
programme you wish to place at a different position in
the list.
> Now press the yellow function key to select the
function Sort. A double arrow will be displayed next
to the selected programme.
> You can now use either the arrow keys up/down
or the numeric keypad to move the programme to
any position in the programme list.
> Press the yellow function key (Store) to store the
new position of the programme in memory.
In order to select a number of programmes
simultaneously, proceed as follows:
> Press the OK key to go to the Select mode.
The selected programme will now be indicated by a
cross in the left margin.
> You can now proceed to select additional
programmes, using the arrow keys up/down.
> When you have completed selecting the programmes
you wish to, press the yellow function key (Sort).
> You can now move the selected programmes to any
position in the programme list, using either the arrow
keys up/down or the numeric keypad.
> Press the yellow function key (Store) to store the
programme(s) at the new position.
> When you have completed configuring the programme
list according to your own preference in this manner,
press the Back key twice to return to normal
operation.
7.1.5 Blocking access to programmes (Parental
Control)
You have the facility to block access to programmes. A
blocked programme will only be displayed on screen once
the programme has been selected, after which the PIN code
must be entered. Once this code has been entered, the
restriction remains de-activated until the receiver is switched
off (Standby).
27
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 27