Filter
Top Products
6.10.2 Using the internal Videotext decoder
If your television set is not equipped with an integrated
videotext decoder, you can still receive videotext via your
receiver, wherever available from the broadcaster.
> Select and switch to the programme of which you
would like to view the videotext information.
> Press the red function key to switch on the videotext.
(Fig. 6-10)
> Use the numeric keypad to enter the videotext
page required. Your entry will be displayed in the
upper left corner of the screen. Once you have ente-
red the the videotext page required, the receiver will
search for the appropriate page. As not all videotext
pages can be transmitted simultaneously, it may take
a few seconds until the receiver has found the page
and displays it on your screen.
Page 100 is the Contents page for all videotext
providers.
> Use the red resp. the green key to page forward
resp. back.
> Press the Back key to return to normal operation.
6.11 Electronic Programme Guide
The EPG function (Electronic Programme Guide) enables
you to display the programme schedules and contents on
your television screen. This allows you to obtain a quick
overview of the programmes and their contents being
broadcast that day, and where available also for the following
days.
6.11.1 Calling up Electronic Programme Guide
> Switch on the receiver as well as your television set.
> Press the EPG key on the remote control of your
receiver. The electronic programme guide of the
programme currently selected will appear on screen.
This will contain data related to today’s programmes
(Fig. 6-11).
6.11.2 Programme preview for following days
Where this is available from the broadcaster, pressing the
arrow key right will allow you to view information on the
programme content for the following days, related to the pro-
gramme currently selected.
Press the arrow key left to return to the previous tables.
21
(Fig. 6-10)
(Fig. 6-11)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 21