TechniSat DigiPal1 Car Video System User Manual


 
35
Image material 16:9 Automatically adapted
for 16:9 TV sets (via SCART)
Letterbox filtering for 4:3
TV sets
Audio decoding:
Audio compression MPEG-1 & MPEG-2 Layer I
and II
Audio Mode Dual (main/sub), Stereo
Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz,
Audio parameters:
Output analogue:
Output level L/R 0,5 V r.m.s. (nominal)
Output impedance 600 Ohms
THD > 60 dB (1 kHz)
Crosstalk < - 65 dB
Volume when switched on Stores last value set
Video parameters:
Output:
Output level FBAS 1 Vs-s into 75 Ohms
Output level RED 0,7 Vs-s into 75 Ohms
Output level GREEN 0,7 Vs-s into 75 Ohms
Output level BLUE 0,7 Vs-s into 75 Ohms
Teletext
Teletext Filtering corresponding to ETS 300 472
Standard
Reception Teletext data (FBAS) corresponding to
ITU-R BT.653-2 lines: 6-22
and 320-335
TV SCART:
Output: FBAS nd RGB
Serial Interface RS 232:
Type RS 232, bi-directional
Bit rate 115 kBit/s
Connector D-SUB socket, 9 pin
Function Update for operating software
EPG Data:
Current, following and preview events of current programme
selected
Timer:
32 events, maximum of 1 year in advance
OSD languages:
German, English
Remote Control System: RC-5
Subsystem address 10 (SAT 2)
Modulation frequency 36 kHz
Infrared wavelength 950 nm
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 35