Filter
Top Products
5.2.1 Parental control
Your receiver is equipped with a parental control function.
Programmes that you have blocked in line with Points
7.1.5 and 7.2 can only be viewed after a four-digit PIN code
has been entered. Go to this line and press the OK key to
activate or deactivate the parental control function on resp.
off.
5.2.2 Time difference to GMT (hours)
Your receiver is equipped with a clock. This is synchronised
via the signal received with Greenwich Mean Time. If you
have entered None (see 5.2.3) under Country, then you
must simply correct the current time with regard to your local
time, using the arrow keys left/right or the OK key. For
Germany, this difference is +1 hour in winter, +2 hours in
summer.
5.2.3 Country
This function automatically provides for the switch to Daylight
Savings Time in summer, and back in winter. Use the arrow
keys left/right to enter your location in the line Country.
> Press the Back key to return to the Settings menu,
or press the Menu key to return to normal operation.
The settings will be automatically stored in memory.
5.2.4 Antenna feed 5V
If you are using an active antenna, you will have to switch on
the antenna feed (5V/100mA). The antenna will be supplied
via the Terrestrial antenna input.
> Use the arrow keys left/right in this line to switch
the antenna feed on or off.
In case of overload, or if there is a short circuit in the antenna
feed, this will be switched off automatically. If this occurs,
please repair the fault, then switch on the antenna feed
again.
5.3 Audio/Video Settings
In order to optimise the settings of your receiver for your TV
set, additional settings may be made in the menu
Audio/Video settings.
> Press the Menu key to call up the Main Menu.
> Use the arrow keys up/down to select the line
Settings.
> Confirm by pressing OK. The sub-menu Settings
will be displayed.
(Fig. 5-4)
> Now use the arrow keys up/down to highlight the
line Audio/Video Settings.
15
(Fig. 5-4)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 15