Filter
Top Products
16
> Confirm by pressing OK. The menu Audio/ Video
Settings will be displayed.
(Fig. 5-5)
> You can use the arrow keys up/down to move the
marker within the menu, and to change the individual
positions as indicated. When selecting a menu item
please also note any additional notes displayed. The
following adjustments can be made:
5.3.1 Picture format
> Use the arrow keys left/right to select the appro-
priate picture format for your TV set, either 4:3 or
16:9. This function allows the picture format to be
adjusted automatically for your television set.
5.3.2 Language (Audio signal)
> Use the arrow keys left/right in this line to select
your preferred language. Where available, this
function will scan for all languages being transmitted,
and will automatically set your preferred language.
5.3.3 TV SCART-Modus
> Use the arrow keys left/right in this line to select
either FBAS or RGB, whichever is appropriate for
your TV set. For standard sets, the default setting is
RGB.
5.3.4 Video system
> Use the arrow keys left/right in this line to select
the broadcasting standard apprpriate to your TV set.
The options that can be selected are PAL BG (stan-
dard setting), PAL I and SECAM BG.
5.3.5 UHF output channel
See Point 4.4.
> Press the key Back to return to the menu Settings
or press the Menu key to return to normal operation.
The settings are automatically stored in memory.
6 Operation
Please note:
Before you can attend to the operation of the
unit, you should, if this was not already done
during the initial installation, carry out a pro-
gramme search (Point 7.4), and where necessary
configure the Favourites list (Point 7.1). Only
when this is completed will all the digital pro-
grammes available in your location be available
to you.
(Fig. 5-5)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 16