Filter
Top Products
19
When switching on the receiver from standby, sound will be
produced at the volume level last set.
> The volume of your receiver can be increased by
using the Volume + key, or you can make it softer by
using the Volume - key.
> Press the Sound on/off key to mute the sound,
press the key again to switch the sound back on.
6.4 Selecting a different language
Where a programme is broadcast in several languages, or
with several sound channels ( in the information box),
you can select a different language or sound channel as fol-
lows:
> Press the key Language selection. If available, a
list of the currently broadcast languages will be dis-
played on screen. (Fig. 6-6)
> Use the arrow keys up/down to select the desired
language.
> Confirm by pressing OK.
You can now listen to the programme in the language
selected. Your receiver is also able to receive mono
broadcasts ( in the information box).
(Fig. 6-7)
6.5 TV/Radio switching
The pre-programming includes radio programmes as well as
television programmes. In Radio mode, the accompanying
TV picture is switched off, and only the programme name is
displayed on screen.
> Switch the receiver into Radio mode by pressing the
TV/Radio key.
The receiver will now switch to the radio programme
last selected.
> Press the TV/Radio key again to switch to the TV
programme most recently selected.
6.6 Return to last programme selected
> Press the Back key on the remote control to return to
the previous programme selected.
> Press the key again to return to the programme
viewed before.
(Fig. 6-6)
(Fig. 6-7)
bed_anl_DigiPal 1.qxd 23.01.03 14:42 Seite 19