Filter
Top Products
12-EN
01GB05IVA310.fm
ALPINE IVA-D310 68-02278Z28-A (EN)
Moving the Monitor to be Flat
When you want to operate some function on the car (air conditioner,
etc.) which is hidden by the raised monitor, use this function.
1
When the monitor is open, press FLAT.
The monitor moves to the flat position.
2
Press FLAT again.
The monitor returns to the previous angle.
• The monitor returns to the previous angle 10 seconds after being
moved to the flat position.
• If an excessive force is added to the monitor when the monitor is flat,
putting an object on the back of the monitor for example, it may
cause a malfunction.
Adjusting the Volume
Adjust the volume by turning the Rotary encoder.
Volume: 0 - 35
Lowering Volume Quickly
Activating this function will instantly lower the volume level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level decreases by about 20 dB.
Pressing MUTE again brings the audio back to its previous level.
How to view the Display
The display unit is equipped with tactile feedback (PULSETOUCH™).
• Be sure to touch the button lightly with the pad of your finger on the
display to protect the display.
• If you touch a button and there is no reaction, remove your finger
from the display once, and try again.
Here is an example explanation for the Radio mode display on how to
recall a source.
1
Touch [SOURCE] on the main screen.
The source selection screen is displayed.
Display example for source selection screen
Changes to main source screen
Displays source modes that can be selected
(The kind of source modes that are displayed varies
depending on connection and setting)
2
Touch [RADIO].
The screen changes to the Radio mode main display.
Main screen example for Radio mode
Displays the source name, such as radio band, etc.,
that is selected
Changes to VISUAL selection screen
Changes to SETUP selection screen
Displays time
Displays shortcut menu screen (see pages 13)
Function Guide:
The function guide display varies depending on each
source.
The contents of the function guide change by touching
[P1/2]* or [P1/3]* on the function guide, and many other
operations can be performed.
Displays volume level
Working state indicator
Changes to the source selection screen (to Step 1
screen)
* Display may vary depending on the connected devices.
• When an optional DVD player or DVD changer compatible with Ai-
NET is connected, AUX 1 appears as “EXT.DVD” or “DVD CHG”
on the display.
• When both the optional DVD player and DVD changer compatible
with Ai-NET are connected, AUX 1 appears as “DVD-1” and AUX 2
as “DVD-2” on the display (When the optional expansion box VPE-
S431 is connected).
• When i-Personalize and OTHER SETUP are selected, these
operations may only be carried out after the car is parked.
Touch button operation
What is the tactile feedback (PULSETOUCH™) ?
When you touch a button graphic in the display, you will feel a
mild vibration and click on the display panel surface. This
feedback enables you to easily identify action areas in the
display.
About the expression of touch buttons in this Owner’s
Manual
• Display buttons in this manual are shown in bold with
[ ] (e.g. [SOURCE]).
• This Owner’s Manual explains mainly the function of touch
buttons, when a touch button and a unit button have the same
function.
Recalling the Source
01GB00IVAD310.book Page 12 Wednesday, December 1, 2004 4:20 AM